If your Coomber PA includes a receiver...

...you only need to purchase:-

• a handheld radio mic, or
• a lapel or headband mic and bodypack.

Note: The frequency of the mic or bodypack must match the frequency of the receiver. The receiver frequency will be marked on the Coomber PA equipment.

---

If your Coomber PA doesn't have a built-in receiver...

...you can still use a radio mic system by purchasing a "Diversity" radio Mic package.

The package includes the radio mic and receiver (shown above), power supply, cables and carry case. Lapel and headband packages also include transmitter bodypacks.

For our full range of radio mics see the radio mics pages in the accessory secion (products) or CLICK HERE.

---

Identification

Coomber PA systems with a receiver will have:-

• an aerial
• a radio mic button*
• /W suffix as part of the model number

Coomber models including radio mic receivers:-

2060/W, 2060/RW, 2060/VW, 2060/RVW

2070/W, 2070/W3

2085/W

2100/W, 2100/RW

* The 2070/W3 has facility

for 3 radio mics.

---

Notes on Frequency

You can't run two radio mics on the same frequency - they won't work properly. Bear this in mind when ordering, particularly if you are already running a radio mic system.

Coomber frequencies include

173.8 MHz

174.1 MHz

174.5 MHz

175.0 MHz

Our standard frequency (supplied unless you request otherwise) is 175.0 MHz.

You can use a Diversity system with an existing radio mic PA - so long as it is of a different frequency. This means that you can have multiple radio mics operating at one time.

Product Support Main Page

go back to last page